MIL-PRF-49080D
3.13.3
Touch up. When piece parts have been finished with complete paint finishes, fixed
assemblies shall be touched up in order to provide a continuous film across the interfaces. This
requirement does not apply to hairline joints between matching parts, gasketed joints, or where
moving parts such as hinges or catches are present. Touch-up paint used shall be identical to the
final paint film and shall provide a reasonable color match with that of other assembled parts.
3.13.4
Coating thickness. The dry film thickness of each pretreatment, primer and final
film coating shall be in accordance with MIL-DTL-53072.
3.13.5
Exceptions. Parts which can be flexed should not be painted with CARC since the
paint will crack.
Marking for CARC. The power supply shall be marked with `CARC' stenciled in
3.13.6
CARC paint in close proximity to the nameplate. A contrasting color shall be used for the marking
(e.g. black marking on a green surface). The marking shall be durable enough to withstand the full
environmental conditions the surface will be exposed to during field use. Plates or embossed
lettering may be used. Embossed letters need not be highlighted as long as they are legible
3.14
Marking. Marking shall conform to MIL-STD-13231. Front panel marking shall
be Group I as described in MIL-STD-13231.
3.14.1
Identification label. An identification label shall be provided for each power
supply. The material used for this label shall be non-reflective. The label shall have a light
background with contrasting black text. For the PP-6224()/U, the upper right hand corner of the
label shall be shaded black and shall contain the nomenclature in contrasting text as in Figure 1.
12
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business