INCH-POUND
MIL-PRF-49080D(CR)
17 March 2010
Superseding
MIL-PRF-49080C(CR)
26 March 2007
PERFORMANCE SPECIFICATION
POWER SUPPLIES, PP-2953()/U AND PP-6224()/U
This specification is approved for use by the Communications- Electronics Life Cycle
Management Command, Department of the Army, and is available for use by all Departments
and Agencies of the Department of Defense.
1
SCOPE
1.1
Scope. This specification establishes the performance and verification
requirements for each of the following Power Supplies: the PP-2953()/U and the PP-6224()/U . The
power supply furnishes 0-25 amperes over a voltage range of 24 to 32VDC from nominal 115/230
VAC at 50, 60 or 400 Hz single phase. The power supply can also operate from a 24 VDC storage
battery in the battery standby mode.
2
APPLICABLE DOCUMENTS
2.1
General. The documents listed in this section are specified in sections 3, 4 or 5 of
this specification. This section does not include documents cited in other sections of this
specification or recommended for additional information or as examples. While every effort has
been made to ensure the completeness of this list, document users are cautioned that they must meet
all specified requirements of documents cited in sections 3, 4 or 5 of this specification, whether or
not they are listed.
Comments, suggestions, or questions on this document should be addressed to Commander, US
Army US Army Communications-Electronics RDEC, ATTN: RDER-PRQ-QE, Fort Monmouth, NJ
07703-5201 or emailed to Robert.Francis@us.army.mil. Since contact information can change, you
may want to verify the currency of this address information using the ASSIST Online database at
AMSC N/A
FSC 6130
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business