A-A-606A
May 20, 1981
SUPERSEDING
A-A-606
December 9, 1979
COMMERCIAL ITEM DESCRIPTION
CHARGER, BATTERY
(THREE PHASE FOR CHARGING 6-CELL INDUSTRIAL STORAGE BATTERIES)
The General Services Administration has authorized the use of this
Commercial Item Description in preference to Federal Specification
W-C-260
This commercial item description covers battery charges for charging portable lead acid batteries in cycle service such as forklifts trucks and other materials handling equipments.
Salient characteristics:
Solid state circuitry.
Full wave rectification with minimum three a.c. voltage taps.
Reverse polarity and surge voltage protected (output voltage held to + 1.0 percent for + 10 percent a.c voltage variation).
Alternating current and direct current overload protected with fail safe operation (failure of any component will not result in damage to the battery due to overcharging or overheating).
60 Hz a.c.
Scaled ammeter.
Indicator light.
Automatic timer with charge termination.
Automatic taper and equalizing charger.
Furnished with 10-foot a.c leads and any Anderson SB, EC, YC, or Russel & Stoll 31000 and 31010 charging connector.
Diodes, transformers and capacitors conforming to industry standards.
Conduit connected.
UL Listing and markings, including identifying, rating, and cautionary, in accordance with UL Standard No. 1236.
The issue of UL Standard No. 1236 in effect on the date of the solicitation shall be used to determine compliance.
Industrial battery charger- 6 cells, three phase
|
Model |
8 Hour charging range at ampere hours |
|
A |
100-200 |
|
B |
201-300 |
|
C |
301-380 |
|
D |
381-450 |
|
E |
451-550 |
|
F |
551-600 |
|
G |
601-680 |
|
H |
681-775 |
|
J |
851-935 |
|
K |
936-1,050 |
|
L |
1,051-1200 |
|
M |
1,201-1400 |
Certification. The contractor shall certify that the product offered meets the salient characteristics of this description and that the product conforms to the producer’s own drawings, specifications, standards and quality assurance practices and is the same product offered for sale in the commercial marketplace. The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.
Recovered materials. The manufacturer shall utilize recovered materials to the maximum extent practicable.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business